How to glue foam crown moldings corners and joints together
Here is a quick way to glue corners, joints and extra pieces together.
This is a way to join corners or extra lengths together to make longer lengths.
It is not nessesery to hot glue joints together as they are being installed on the wall.
 |
Purchase a low temperature glue gun.
(available at Walmart or local craft stores)
$3 to $5 with glue sticks
|
 |
Apply a small half bead of glue
in the area shown.
Do not apply too heavy or too close to
the edge or the excess will come
out of the seam.
|
 |
Once glue is applied, align both
corner pieces and press together
with a firm pressure for
approximately 15 seconds.
|
 |
For end to end pieces, apply glue and
hold together with a firm pressure for
approximately 15 seconds.
|