With Creative Crown it is so simple to make easy to finish foam crown molding joints and seams.
Use these simple steps for smooth joints and seams.
 |
 |
# 2 Glue and align moldings and glue to the wall
|
#3 Apply a sandable spackle compound to joint.
|
 |
 |
# 4 Smooth off or drag down joint with a credit
card like object or a caulk rite tool.
|
#5 Sand joint with a sandpaper sponge. 100 grit
works well and gives a very smooth finish.
|
 |
 |
# 6 Touch up joint with water based paints only.
Use any flat, semi gloss or high gloss paints
|
# 7 Apply a 1/16" - 1/8" bead of painters caulk to the top
and bottom of molding for a finished look.
|
 |
 |
# 8 Pull the tool along the profile for a smooth look.
|
Buy this sandpaper from our online store.
This sandpaper comes in all of our installation kits.
|
 |
 |
Buy this spackle from our online store.
This tool spackle in all of our installation kits.
|
Buy this tool from our online store.
This tool comes in all of our installation kits.
|
Decorative crown molding, Flexible crown molding, Styrofoam crown molding, Base molding, Chair rail moldings
Office hours - Monday - Friday 8:30 to 5:00 Central time
©2003 Creative Crown • Phone 800-315-6311 • Local 817-641-2993 • FAX 817-641 6711
1265 West Kilpatrick Street, Cleburne, TX 76033